Once you’ve created your LightScribe label, you’re ready to print it. The higher the quality, the longer the process will take. If black isn’t your color, you’re in luck. Before you can do this though, you will need to choose the contrast. By looking at the picture below you can see the drive’s SATA interface and power connector. Of course you can’t do this with just any drive, media or software. SmartWrite also works with supported media.

Uploader: Vigami
Date Added: 20 May 2009
File Size: 13.68 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 28633
Price: Free* [*Free Regsitration Required]

They also lite-on lh-20a1l be lite-on lh-20a1l to recognize LightScribe media. However, at litte-on time of this review, the list of compatible software is still relatively short.

The new writing strategy is then created on-the-fly. According to HP, it’s as simple as burning the data, flipping the disc, and then burning the label.

Lite-On 20x LH-20A1L

This means that the drive’s region is stored in the firmware. Even if you have a LightScribe capable drive and media, you will need software that supports it. While there isn’t an RPC-1 firmware available for the drive, there is a utility available that can make the drive region free. For example, if your disc lite-on lh-20a1l normally supported llh-20a1l only 8x, the LHA1L would now give you the option to write to it at 12x.

Lh-20z1l triggers a chemical reaction that produces a color change, allowing the user to print text, artwork or graphics.

Off lite-on lh-20a1l default, this LED lights up green whenever lite-on lh-20a1l drive is reading or writing. It not only shares the same basic bezel design, but has many of the same logos. Before lige-on can do this though, you will need to choose the contrast. For lite-on lh-20a1l purposes, we created a few discs using Verbatim’s LightScribe v1. The higher the quality, the longer the process will take.

While LightScribe capable drives use the same laser when burning both the data and label, they have to be lite-on lh-20a1l to accurately control the laser’s focus and position as well as the spindle speed. Of lite-on lh-20a1l ljte-on can’t do this with just any drive, media or software. InfoTool had no problems detecting the LHA1L’s maximum reading and writing speeds, recording modes, buffer underrun protection and 2MB buffer. Like most drives, it did not pass the “three lite-on lh-20a1l test.

Simply enable SmartWrite, insert your disc and burn. If black isn’t your color, you’re in luck. In both cases, the quality has been set to “best”.

The retail version of the LHA1L also comes with a beige replacement bezel. The rear of lite-on lh-20a1l LHA1L is pretty straightforward.

SmartWrite also works with supported media. In this review we’ll lite-on lh-20a1l go over some of the basics and lite-on lh-20a1l how the LHA1L performs with the bundled software. Keep in mind this option not only changes the level of detail, it also affects the amount of time it takes to print the label. For this review the drive’s firmware has been updated to version BL How long does it take to print a label?

The specs below have been taken from Lite-On’s website and the documentation that came along with the drive. These special discs have a thin lite-on lh-20a1l coating on the label side that absorbs laser light.

– Features – Lite-On LHA1L 20x ‘Super AllWrite’ DVD±RW/RAM – Reviews

Here is a screen shot from Nero’s InfoTool. Take note that the lite-on lh-20a1l are lite-on lh-20a1l linked together so when you set the book type for one media type, it is applied to all. This is very useful if you are trying to record a disc that uses another company’s MID code I. This program queries the drive lite-on lh-20a1l see what its reading and writing capabilities are.

By looking at the picture below lite-on lh-20a1l can see the drive’s SATA interface and power connector. Using the bundled software you can kh-20a1l create and burn LightScribe disc labels.